Kebtek Foam Cannon with Pressure Washer Gun 5200 PSI with Pressure Washer Quick 6-in-1 Nozzle Tips

【6-IN-1 Nozzle Tip】 カートに入れる

PRODUCTS Description

Kebtek Foam Cannon for Pressure Washer

A foam cannon is a popular accessory used in conjunction with a pressure washer gun to produce thick foam for cleaning vehicles, buildings, and other surfaces. It is widely used in the automotive detailing industry to apply a layer of soapy foam on vehicles before manually washing them.

Using a foam cannon with a pressure washer gun can save time and effort during the cleaning process, as the foam helps to break down dirt and lift contaminants, reducing the need for aggressive scrubbing. It also provides an even application of soap over large surfaces, ensuring thorough cleaning. However, it's essential to follow the manufacturer's guidelines for soap dilution and usage to avoid damage to surfaces and achieve the best results.

Here's how a foam cannon works with a pressure washer:

1. Fill the foam gun's reservoir with an appropriate amount of car wash soap or detergent.
2. Connect the foam gun to the high pressure wash gun.
3. Adjust the soap mixture: Turn the adjustable knob or valve on the foam gun to control the ratio of soap to water, which adjusts the consistency of the foam.
4. Pull the trigger of the high-pressure cleaning gun to spray the foam.
5. Allow the foam to remain on the surface for a few minutes. At the end of the dwell time, turn off the foam gun and use a high-pressure cleaning gun with a regular nozzle to rinse off the foam and loose dirt.


Wider Neck to Prevent Leakage The container bottle of the Snow Foam Cannon has a larger neck that is easy to fill and does not leak when pouring in soap solution.	Knob to Adjust Foam Concentration Adjust the top knob to control the foam consistency. Turn the top knob to the right, minus (-) for less water (more foam), minus (+) for more water (less foam).	Safety Locking Handle The safety lock design of the short gun can prevent the negative effects of misuse.

MRP-001-A PACKAGE INCLUDED

1. Pressure Washer Gun*1

2. 1L Foam Cannon*1

3. 6-in-1 Nozzle*1

4. M22-15mm Male Coupler*1

PRESSURE WASHER GUN KIT

HOW TO INSTALL FOAM CANNON

1. Fill some soap into the bottle with water.

2. Connect 1/4" quick connection plug to pressure washer gun.

3. Adjust the knob to desired foam level. Then adjust plastic coat of spray

nozzle to desired fan pattern.

4. Unlock trigger gun and it disperses thick foam.

5. After cleaning, please turn the knob to the end of “+” and spray pure

water without foam for 10 seconds. It will clean out the remaining soap in

the orifice nozzle and foam maker. Or it is easy to be blocked by

remaining soap.

Warm Tips: This foam cannon with pressure washer gun needs to be connected to a high pressure washer and cannot be directly adapted to connect to a garden hose, faucet.


	K-PRO Cordless Pressure Washer	K-ST Cordless Pressure Washer	Foam Cannon with Pressure Washer Gun	5 Nozzle Tips	6-IN-1 Nozzle
Max Water Pressure	900PSI	652PSI	5200PSI	✘	✘
Number of Batteries	2pcs	1pcs	✘	✘	✘
Motor Type	Brushless Motor	Brushless Motor	✘	✘	✘